Hyundai Venue: Air Conditioning System / Evaporator Temperature Sensor. Description and operation
The evaporator temperature sensor will detect the evaporator core temperature
and interrupt compressor relay power in order to prevent evaporator from freezing
by excessive cooling.

Inspection
•
Before measuring the pressure of the refriferant line, check
whether the refrigerant amount is charged in accordance with
the specified charging amount...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector...
Other information:
Component Location
[Engine Room]
1. Condenser
2. Discharge hose
3. Suction & Liquid tube assembly
4. Compressor
5. Service port (High pressure)
6. A/C Pressure transducer (APT)
7. Service port (Low pressure)
8...
Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump")
2.
Disconnect the electric pump wiring connector (A) and the fuel sender
connector (B)...
Categories

Your HYUNDAI uses a Smart Key, which you can use to lock or unlock the driver
and passenger doors or the rear liftgate.
1. Door Lock
2. Door Unlock
3. Remote start
read more