Hyundai Venue (QX): Cylinder Block / Components and components location

Hyundai Venue (QX) (2020-2025) Service Manual / Engine Mechanical System / Cylinder Block / Components and components location

Components

Hyundai Venue. Components and components location

1. Cylinder block
2. Ladder frame
3. Crankshaft
4. Crankshaft upper bearing
5. Crankshaft lower bearing
6. Thrust bearing
 7. Main bearing
8. Flywheel
9. Crankshaft sproket
10. Crankshaft pulley
11. Drive plate
12. Adapter plate
 13. Piston ring
14. Piston
15. Piston pin
16. Connecting rod
17. Connecting rod upper bearing
18. Connecting rod lower bearing
19. Connecting rod bearing cap

    Components 1. Crankshaft sprocket 2. Crankshaft thrust bearing 3. Crankshaft upper main bearing 4. Crankshaft 5.

    Other information:

    Hyundai Venue (QX) (2020-2025) Service Manual: Repair procedures

    Inspection The following section describes how to diagnose faults using a diagnostic instrument. 1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.

    Hyundai Venue (QX) (2020-2025) Service Manual: Blower Motor. Repair procedures

    Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.

    Categories

     
    Copyright © 2025 www.hvenueqx.com - 0.0156