Hyundai Venue (QX): Light Bulbs / High Mounted Stop Lamp & License Plate Light Bulb Replacement
High Mounted Stop Lamp Replacement
1. Open the liftgate.
2. Remove the lamp cover from the lamp assembly with a cross-tip screwdriver.
3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.
4. Remove the bulb by pulling it straight out.
5. Insert a new bulb in the socket.
6. Reinstall the light assembly to the body of the vehicle.
License Plate Light Bulb Replacement
1. Remove the cover by pressing it as direction of the arrows.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb.
4. Reinstall in the reverse order.
Type A (Standard) Type B (LED) (1) Tail lamp (2) Stop/Tail lamp (3) Turn signal lamp (4) Back-up lamp (5) Side marker Stop/tail lamp and turn signal lamp replacement 1.
Map lamp, Room lamp, Vanity mirror lamp, Luggage compartment lamp and Glove box lamp Map lamp (Type A) Map lamp (Type B) Room lamp Vanity mirror lamp Luggage compartment lamp 1.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Specifications
Specification Air Conditioner item Specification Compressor Type DVE12N Oil type & Capacity PAG 30 120 ± 10cc (4.23 ± 0.34oz.) Displacement 122 cc / rev Expansion valve Type
Hyundai Venue (QX) (2020-2026) Service Manual: Rear Corner Radar Unit. Repair procedures
Removal lf replacement of the rear corner radar unit bracket or extension wire is required, replace the defective part only with a new one. 1.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Engine Mechanical System
- Remote start
- Rear Seat Assembly. Repair procedures
- New on site
- Most important about car
