| Replacement |
| 1. |
Loosen the mounting screw and remove the inside rear view mirror (A).
|
| 2. |
To install, reverse the removal procedure.
|
Component Location 1. Inside rear view mirror
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the steering column upper and lower shrouds.
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.