Hyundai Venue: Engine Control System / Accelerator Position Sensor (APS). Schematic diagrams
[M/T]

[A/T]

Harness Connector

Specification
Items
Specification
APS 1
APS 2
C.T
0...
Inspection
1.
Connect the diagnostic tool on the Diagnosis Link Connector (DLC).
2.
Start engine and check output voltages of APS 1 and 2 at C...
Other information:
Description
Knocking is a phenomenon characterized by undesirable vibration and noise and
can cause engine damage. Knock Sensor (KS) is installed on the cylinder block
and senses engine knocking.
When knocking occurs, the vibration from the cylinder block is applied as pressure
to the piezoelectric element...
Inspection
Operating Logic Test (Manual only)
Inspect the PTC operation by confirmation logic as follows;
1.
Entering
(1)
Set the Floor mode and maximum heating position.
(2)
Turn off the blower switch...
Categories

Your HYUNDAI uses a Smart Key, which you can use to lock or unlock the driver
and passenger doors or the rear liftgate.
1. Door Lock
2. Door Unlock
3. Remote start
read more