Hyundai Venue: Seat Electrical / Air Ventilation Seat. Components and components location

Hyundai Venue (QX) (2020-2025) Service Manual / Body Electrical System / Seat Electrical / Air Ventilation Seat. Components and components location

Component Location

[Front Ventilation Seat]

Hyundai Venue. Air Ventilation Seat. Components and components location

1. Ventilation seat unit (Assist seat only)

2. Ventilation seat blower

Seat Heater Switch. Repair procedures

Removal [Front Seat] 1. Disconnect the negative (-) battery terminal. 2. Remove the floor console upper cover...

Air Ventilation Seat. Schematic diagrams

Other information:

Hyundai Venue (QX) (2020-2025) Service Manual: Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect IATS connector. 3. Measure resistance between IATS terminals 3 and 4. 4. Check that the resistance is within the specification...

Hyundai Venue (QX) (2020-2025) Service Manual: Coolant. Repair procedures

Replacement and Air Bleeding • Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the radiator...

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Do not install bumper guards or replace the bumper with a nongenuine HYUNDAI parts. This may adversely affect the collision and air bag deployment performance. Place the ignition switch in the LOCK/OFF or ACC position when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs conducted by an authorized HYUNDAI dealer.

Hyundai Venue. Air bag collision sensors