Replacement 1. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Cushion Assembly") 2.
General Troubleshooting Information Before Troubleshooting 1. Check applicable fuses in the appropriate fuse/relay box.
Replacement 1. Remove the condenser. 2. Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 - 14.71 N.m (1.
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.