| Component Location |

| 1. Auto light sensor 2. Head lamps 3. Integrated Body Control Unit (IBU) |
4. Lighting switch (Auto) 5. Tail lamps |
Specifications Items Specifications Rated voltage 5V Load Max.
Circuit Diagram
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.
Removal 1. Remove the bumper cover. (Refer to Body - "Front Bumper Cover") 2. Disconnect the connector (A) from the PDW sensor. [L - Type] Installation 1.