Replacement 1. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Cushion Assembly") 2.
General Troubleshooting Information Before Troubleshooting 1. Check applicable fuses in the appropriate fuse/relay box.
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the cool position when connecting 12V to terminal 3 and grounding terminal 7.