| Replacement |
|
| 1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
|
| 2. |
Loosen the mounting screws and remove the front seat shield inner cover
(A).
|
| 3. |
To install, reverse removal procedure.
|
Component Location 1. Front seat shield inner cover
Component Location 1. Front seat back cover
Replacement 1. Remove the condenser. 2. Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 - 14.71 N.m (1.
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front door trim") 3. Disconnect the power door mirror connector from the harness 4.