Hyundai Venue: General Tightening Torque Table / General information

Hyundai Venue (QX) (2020-2025) Service Manual / General Information / General Tightening Torque Table / General information

Tightening Torque Table of Standard Parts
BOLT (Nominal diameter)
NUT (Nominal diameter)

Hyundai Venue. General information

Hyundai Venue. General information


BOLT/NUT Normal screw
Torque Nm (kg.m, Ib-ft)

Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

Hyundai Venue. General information

Hyundai Venue. General information

Hyundai Venue. General information

Hyundai Venue. General information

M5
0.8 (0.031)
2.0 - 3.0 (0.2 - 0.3, 1.4 - 2.2)
4.9 - 6.9 (0.5 - 0.7, 3.6 - 5.1)
7.8 - 10.8 (0.8 - 1.1, 5.8 - 8.0)
M6
1 (0.039)
2.9 - 4.9 (0.3 - 0.5, 2.2 - 3.6) 
8.8 - 12.7 (0.9 - 1.3, 6.5 - 9.4) 
13.7 - 18.6 (1.4 - 1.9, 10.1 - 13.7)
M8
1.25 (0.049)
8.8 - 11.8 (0.9 - 1.2, 6.5 - 8.7)
22.6 - 30.4 (2.3 - 3.1, 16.6 - 22.4) 
33.3 - 44.1 (3.4 - 4.5, 24.6 - 32.5)
M10
1.5 (0.059)
16.7 - 22.6 (1.7 - 2.3, 12.3 - 16.6)
45.1 - 60.8 (4.6 - 6.2, 33.3 - 44.8)
65.7 - 88.3 (6.7 - 9.0, 48.5 - 65.1)
M12
1.75 (0.068)
29.4 - 39.2 (3.0 - 4.0, 21.7 - 28.9)
78.5 - 105.9 (8.0 - 10.8, 57.9 - 78.1)
114.7 - 154.9 (11.7 - 15.8, 84.6 - 114.3)
M14
2 (0.078)
47.1 - 63.7 (4.8 - 6.5, 34.7 - 47.0)
125.5 - 169.7 (12.8 - 17.3, 92.6 - 125.1)
183.4 - 249.1 (18.7 - 25.4, 135.3 - 183.7)
M16
2 (0.078)
73.5 - 100.0 (7.5 - 10.2, 54.2 - 73.8)
197.1 - 266.7 (20.1 - 27.2, 145.4 - 196.7)
288.3 - 390.3 (29.4 - 39.8, 212.7 - 287.9)
M20
2.5 (0.098)
144.2 - 195.2 (14.7 - 19.9, 106.3 - 143.9)
396.2 - 535.4 (40.4 - 54.6, 292.2 - 394.9)
565.8 - 764.9 (57.7 - 78.0, 417.3 - 564.2)
M24
3 (0.118)
249.1 - 337.3 (25.4 - 34.4, 183.7 - 248.8)
687.4 - 929.7 (70.1 - 94.8, 507.0 - 685.7)
975.8 - 1320.0 (99.5 - 134.6, 719.7 - 973.6)
M30
3.5 (0.137)
499.2 - 674.7 (50.9 - 68.8, 368.2 - 497.6)
1372.9 - 1858.4 (140.0 - 189.5, 1012.6 - 1370.7)
1956.4 - 2647.8 (199.5 - 270.0, 1443.0 - 1952.9)

BOLT/NUT Thin screw
Torque Nm (kg.m, Ib-ft)
Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

Hyundai Venue. General information

Hyundai Venue. General information

Hyundai Venue. General information

Hyundai Venue. General information

M5
0.5 (0.019)
2.0 - 3.0 (0.2 - 0.3, 1.4 - 2.2)
5.9 - 8.8 (0.6 - 0.9, 4.3 - 6.5)
8.8 - 12.7 (0.9 - 1.3, 6.5 - 9.4)
M6
0.75 (0.029)
3.9 - 4.9 (0.4 - 0.5, 2.9 - 3.6)
9.8 - 13.7 (1.0 - 1.4, 7.2 - 10.1)
14.7 - 20.6 (1.5 - 2.1, 10.8 - 15.2)
M8
1 (0.039)
8.8 - 11.8 (0.9 - 1.2, 6.5 - 8.7)
24.5 - 32.4 (2.5 - 3.3, 18.1 - 23.9)
35.3 - 48.1 (3.6 - 4.9, 26.0 - 35.4)
M10
1.25 (0.049)
17.7 - 23.5 (1.8 - 2.4, 13.0 - 17.4)
47.1 - 63.7 (4.8 - 6.5, 34.7 - 47.0)
69.6 - 94.1 (7.1 - 9.6, 51.4 - 69.4)
M12
1.25 (0.049)
32.4 - 44.1 (3.3 - 4.5, 23.9 - 32.5)
86.3 - 117.7 (8.8 - 12.0, 63.7 - 86.8)
127.5 - 172.6 (13.0 - 17.6, 94.0 - 127.3)
M14
1.5 (0.059)
51.0 - 69.6 (5.2 - 7.1, 37.6 - 51.4)
136.3 - 185.3 (13.9 - 18.9, 100.5 - 136.7)
201.0 - 271.6 (20.5 - 27.7, 148.3 - 200.4)
M16
1.5 (0.059)
79.4 - 107.9 (8.1 - 11.0, 58.6 - 79.6)
211.8 - 286.4 (21.6 - 29.2, 156.2 - 211.2)
311.8 - 421.7 (31.8 - 43.0, 230.0 - 311.0)
M20
1.5 (0.059)
163.8 - 221.6 (16.7 - 22.6, 120.8 - 163.5)
448.2 - 607.0 (45.7 - 61.9, 330.5 - 447.7)
639.4 - 864.9 (65.2 - 88.2, 471.6 - 638.0)
M24
2 (0.078)
276.5 - 373.6 (28.2 - 38.1, 204.0 - 275.6)
759.0 - 1026.8 (77.4 - 104.7, 559.8 - 757.3)
1080.7 - 1462.2 (110.2 - 149.1, 797.1 - 1078.4)
M30
2 (0.078)
562.9 - 762.0 (57.4 - 77.7, 415.2 - 562.0)
1553.4 - 2102.5 (158.4 - 214.4, 1145.7 - 1550.8)
2210.4 - 2991.0 (225.4 - 305.0, 1630.3 - 2206.1)

Flange BOLT (Nominal diameter)
Flange NUT (Nominal diameter)

Hyundai Venue. General information

Hyundai Venue. General information


Flange BOLT/NUT Normal screw
Torque Nm (kg.m, Ib-ft)
Nominal diameter.
(mm)
Pitch [ mm (in.) ]
4T
8T
10T

Hyundai Venue. General information

Hyundai Venue. General information

Hyundai Venue. General information

Hyundai Venue. General information

M5
0.8 (0.031)
2.0 - 2.9 (0.2 - 0.3, 1.4 - 2.2)
5.9 - 7.8 (0.6 - 0.8, 4.3 - 5.8)
8.8 - 11.8 (0.9 - 1.2, 6.5 - 8.7)
M6
1 (0.039)
3.9 - 4.9 (0.4 - 0.5, 2.9 - 3.6)
9.8 - 13.7 (1.0 - 1.4, 7.2 - 10.1)
14.7 - 19.6 (1.5 - 2.0, 10.8 - 14.5)
M8
1.25 (0.049)
8.8 - 11.8 (0.9 - 1.2, 6.5 - 8.7)
24.5 - 32.4 (2.5 - 3.3, 18.1 - 23.9)
35.3 - 48.1 (3.6 - 4.9, 26.0 - 35.4)
M10
1.5 (0.059)
17.7 - 24.5 (1.8 - 2.5, 13.0 - 18.1)
48.1 - 65.7 (4.9 - 6.7, 35.4 - 48.5)
70.6 - 96.1 (7.2 - 9.8, 52.1 - 70.9)
M12
1.75 (0.068)
31.4 - 43.1 (3.2 - 4.4, 23.1 - 31.8)
84.3 - 113.8 (8.6 - 11.6, 62.2 - 83.9)
123.6 - 167.7 (12.6 - 17.1, 91.1 - 123.7)
M14
2 (0.078)
51.0 - 68.6 (5.2 - 7.0, 37.6 - 50.6)
135.3 - 182.4 (13.8 - 18.6, 99.8 - 134.5)
198.1 - 268.7 (20.2 - 27.4, 146.1 - 198.2)
M16
2 (0.078)
79.4 - 107.9 (8.1 - 11.0, 58.6 - 79.6)
212.8 - 288.3 (21.7 - 29.4, 157.0 - 212.7)
311.8 - 421.7 (31.8 - 43.0, 230.0 - 311.0)

Flange BOLT/NUT Thin screw
Torque Nm (kg.m, Ib-ft)

Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

Hyundai Venue. General information

Hyundai Venue. General information

Hyundai Venue. General information

Hyundai Venue. General information

M5
0.5 (0.019)
2.9 - 2.9 (0.3 - 0.3, 2.2 - 2.2)
6.9 - 8.8 (0.7 - 0.9, 5.1 - 6.5)
9.8 - 13.7 (1.0 - 1.4, 7.2 - 10.1)
M6
0.75 (0.029)
3.9 - 5.9 (0.4 - 0.6, 2.9 - 4.3)
10.8 - 14.7 (1.1 - 1.5, 8.0 - 10.8)
16.7 - 21.6 (1.7 - 2.2, 12.3 - 15.9)
M8
1 (0.039)
9.8 - 12.7 (1.0 - 1.3, 7.2 - 9.4)
26.5 - 35.3 (2.7 - 3.6, 19.5 - 26.0)
38.2 - 52.0 (3.9 - 5.3, 28.2 - 38.3)
M10
1.25 (0.049)
19.6 - 25.5 (2.0 - 2.6, 14.5 - 18.8)
51.0 - 68.6 (5.2 - 7.0, 37.6 - 50.6)
75.5 - 102.0 (7.7 - 10.4, 55.7 - 75.2)
M12
1.25 (0.049)
35.3 - 48.1 (3.6 - 4.9, 26.0 - 35.4)
94.1 - 126.5 (9.6 - 12.9, 69.4 - 93.3)
138.3 - 186.3 (14.1 - 19.0, 102.0 - 137.4)
M14
1.5 (0.059)
55.9 - 75.5 (5.7 - 7.7, 41.2 - 55.7)
148.1 - 200.1 (15.1 - 20.4, 109.2 - 147.6)
216.7 - 293.2 (22.1 - 29.9, 159.8 - 216.3)
M16
1.5 (0.059)
86.3 - 116.7 (8.8 - 11.9, 63.7 - 86.1)
229.5 - 309.9 (23.4 - 31.6, 169.3 - 228.6)
336.4 - 455.0 (34.3 - 46.4, 248.1 - 335.6)

Hyundai Venue. General information   
1)
The torques shown in the table are standard values under the following conditions.
Nuts and bolts are made of galvanized steel bar.
Galvanized plain steel washers are inserted.
All nuts, bolts and plain washers are dry.
2)
The torques shown in the table are not applicable.
When spring washers, toothed washers and the like are inserted.
If plastic parts are fastened.
If self-tapping screws or self-locking nuts are used.
If threads and surfaces are coated with oil.

    General Tightening Torque Table

    ..

    Important Safety Notice

    ..

    Other information:

    Hyundai Venue (QX) (2020-2025) Service Manual: Crash Pad Lower Panel. Repair procedures


    Replacement    • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...

    Hyundai Venue (QX) (2020-2025) Owners Manual: Detecting Sensor


    The rear corner radars are located inside the rear bumper for detecting the side and rear areas. Always keep the rear bumper clean for proper operation of the system. NOTICE The system may not work properly when the bumper has been damaged, or if the rear bumper has been replaced or repaired...

    Categories

    Interior Overview

    Hyundai Venue. Interior Overview

    1. Door lock/unlock button
    2. Outside rearview mirror control switch
    3. Central door lock switch
    4. Power window switches
    5. Power window lock switch

    read more


     
    Copyright © 2025 www.hvenueqx.com