Hyundai Venue (QX): Charging System / Battery Sensor. Description and operation
Hyundai Venue (QX) (2020-2026) Service Manual / Engine Electrical System / Charging System / Battery Sensor. Description and operation
| Description |
Vehicles have many control units that use more electricity. These units control
their own system based on information from diverse sensors. It is important
to have a stable power supply as there diverse sensors giving a variety of information.
Battery sensor (A) is mounted on battery (-) terminal. It transmits battery
voltage, current, temperature information to ECM. ECM controls generating voltage
by duty cycle based on these signals.
Troubleshooting
Removal 1. Disconnect the battery negative (-) cable. 2. Disconnect the battery sensor connector (A).
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: PTC Heater. Repair procedures
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.
Hyundai Venue (QX) (2020-2026) Service Manual: Temperature Control Actuator. Description and operation
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Operating Door Locks from Outside the Vehicle
- Lighting control
- Tire Pressure Monitoring System (TPMS) (Type A)
- New on site
- Most important about car
Copyright В© 2026 www.hvenueqx.com - 0.0116