Hyundai Venue (QX): Engine Electrical System / Charging System
- Description and operation
- Repair procedures
- Alternator
- Battery. Description and operation
- Battery. Specifications
- Battery. Repair procedures
- Battery. Troubleshooting
- Battery Sensor. Description and operation
- Battery Sensor. Repair procedures
Inspection [On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2.
Description The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire.
Other information:
Hyundai Venue (QX) (2020-2025) Service Manual: Mode Control Actuator. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.
Hyundai Venue (QX) (2020-2025) Service Manual: Blower Resistor (Manual). Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Engine Control / Fuel System
- Advanced Driver Assistance System (ADAS)
- Maintenance
- New on site
- Most important about car
