| Components |

| 1. Upper return spring 2. Shoe adjuster 3. Adjusting lever 4. Shoe hold down pin |
5. Shoe hold spring 6. Shoe 7. Adjusting spring 8. Lower return spring |
Removal • Frequent inhalation of brake pad dust, regardless of material composition, could be hazardous to your health.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the console upper front garnish. (Refer to Floor Console - "Floor Console Assembly") 3.