| Components |

| 1. Parking brake lever 2. Equalizer assembly |
3. Parking brake cable 4. Rear Brake caliper |
Removal 1. Disconnect the negative (-) battery cable. 2. Release the parking brake. 3.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box. (Refer to Body - "Glove Box Housing") 3. Remove the smart key unit (A) after loosening the nuts.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.