Hyundai Venue (QX): Starting System / Description and operation
Hyundai Venue (QX) (2020-2026) Service Manual / Engine Electrical System / Starting System / Description and operation
| Description |
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery cable.
When the ignition key is turned to the start position, current flows and energizes
the starter motor's solenoid coil.
The solenoid plunger and clutch shift lever are activated, and the clutch pinion
engages the ring gear.
The contacts close and the starter motor cranks.
In order to prevent damage caused by excessive rotation of the starter armature
when the engine starts, the clutch pinion gear overruns.
Troubleshooting • The battery must be in good condition and fully charged for this troubleshooting.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Repair procedures
Inspection The following section describes how to diagnose faults using a diagnostic instrument. 1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.
Hyundai Venue (QX) (2020-2026) Service Manual: Condenser. Components and components location
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Rear Seat Assembly. Repair procedures
- Delivery Pipe. Repair procedures
- Shift-lock system, Shift-lock release, Parking
- New on site
- Most important about car
Copyright © 2026 www.hvenueqx.com - 0.0102