Hyundai Venue (QX): Front Seat / Front Seat Frame Assembly. Repair procedures

Replacement
Hyundai Venue. Front Seat Frame Assembly. Repair procedures   
•
Put on gloves to prevent hand injuries.
1.
Remove the front seat back cover.
(Refer to Front Seat - "Front Seat Back Cover")
2.
Remove the front seat cushion cover.
(Refer to Front Seat - "Front Seat Cushion Cover")
3.
Remove the SAB module.
(Refer to Restraint - "Side Airbag (SAB) Module")
4.
Loosen the mounting bolts and detach the front seat back frame assembly (A) from the front seat cushion frame assembly (B).
Tightening torque :
44.1 - 53.9 N.m (4.5 - 5.5 kgf.m, 32.5 - 39.8 lb-ft)

Hyundai Venue. Front Seat Frame Assembly. Repair procedures

5.
To install, reverse removal procedure.
Hyundai Venue. Front Seat Frame Assembly. Repair procedures   
•
For the seat equipped with side airbag, remove the side airbag from the seat frame assembly.
(Refer to Restraint - "Side Airbag (SAB) Module")
•
Before service, be fully aware of precautions and service procedure relevant to air bag.
(Refer to Restraint - "Side Airbag (SAB) Module")

    Component Location 1. Front seat back frame assembly 2. Front seat cushion frame assembly

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Repair procedures

    Refrigerant System Service Basics (R-134a) Refrigerant Recovery Use only service equipment that is U.L-listed and is certified to meet the requirements of SAE J2210 to remove HFC-134a(R-134a) from the air conditioning system.

    Hyundai Venue (QX) (2020-2026) Service Manual: Temperature Control Actuator. Description and operation

    Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0135