Hyundai Venue (QX): General Tightening Torque Table / General information

Hyundai Venue (QX) (2020-2026) Service Manual / General Information / General Tightening Torque Table / General information

Tightening Torque Table of Standard Parts
BOLT (Nominal diameter)
NUT (Nominal diameter)

Hyundai Venue. General information

Hyundai Venue. General information

BOLT/NUT Normal screw
Torque Nm (kg.m, Ib-ft)

Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

Hyundai Venue. General information

Hyundai Venue. General information

Hyundai Venue. General information

Hyundai Venue. General information
M5
 0.8 (0.031)
2.0 - 3.0 (0.2 - 0.3, 1.4 - 2.2)
4.9 - 6.9 (0.5 - 0.7, 3.6 - 5.1)
7.8 - 10.8 (0.8 - 1.1, 5.8 - 8.0)
M6
 1 (0.039)
2.9 - 4.9 (0.3 - 0.5, 2.2 - 3.6) 
8.8 - 12.7 (0.9 - 1.3, 6.5 - 9.4) 
13.7 - 18.6 (1.4 - 1.9, 10.1 - 13.7)
M8
 1.25 (0.049)
8.8 - 11.8 (0.9 - 1.2, 6.5 - 8.7)
22.6 - 30.4 (2.3 - 3.1, 16.6 - 22.4) 
33.3 - 44.1 (3.4 - 4.5, 24.6 - 32.5)
M10
 1.5 (0.059)
16.7 - 22.6 (1.7 - 2.3, 12.3 - 16.6)
45.1 - 60.8 (4.6 - 6.2, 33.3 - 44.8)
65.7 - 88.3 (6.7 - 9.0, 48.5 - 65.1)
M12
 1.75 (0.068)
29.4 - 39.2 (3.0 - 4.0, 21.7 - 28.9)
78.5 - 105.9 (8.0 - 10.8, 57.9 - 78.1)
114.7 - 154.9 (11.7 - 15.8, 84.6 - 114.3)
M14
 2 (0.078)
47.1 - 63.7 (4.8 - 6.5, 34.7 - 47.0)
125.5 - 169.7 (12.8 - 17.3, 92.6 - 125.1)
183.4 - 249.1 (18.7 - 25.4, 135.3 - 183.7)
M16
 2 (0.078)
73.5 - 100.0 (7.5 - 10.2, 54.2 - 73.8)
197.1 - 266.7 (20.1 - 27.2, 145.4 - 196.7)
288.3 - 390.3 (29.4 - 39.8, 212.7 - 287.9)
M20
 2.5 (0.098)
144.2 - 195.2 (14.7 - 19.9, 106.3 - 143.9)
396.2 - 535.4 (40.4 - 54.6, 292.2 - 394.9)
565.8 - 764.9 (57.7 - 78.0, 417.3 - 564.2)
M24
 3 (0.118)
249.1 - 337.3 (25.4 - 34.4, 183.7 - 248.8)
687.4 - 929.7 (70.1 - 94.8, 507.0 - 685.7)
975.8 - 1320.0 (99.5 - 134.6, 719.7 - 973.6)
M30
 3.5 (0.137)
499.2 - 674.7 (50.9 - 68.8, 368.2 - 497.6)
1372.9 - 1858.4 (140.0 - 189.5, 1012.6 - 1370.7)
1956.4 - 2647.8 (199.5 - 270.0, 1443.0 - 1952.9)

BOLT/NUT Thin screw
Torque Nm (kg.m, Ib-ft)
Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

Hyundai Venue. General information

Hyundai Venue. General information

Hyundai Venue. General information

Hyundai Venue. General information
M5
 0.5 (0.019)
2.0 - 3.0 (0.2 - 0.3, 1.4 - 2.2)
5.9 - 8.8 (0.6 - 0.9, 4.3 - 6.5)
8.8 - 12.7 (0.9 - 1.3, 6.5 - 9.4)
M6
 0.75 (0.029)
3.9 - 4.9 (0.4 - 0.5, 2.9 - 3.6)
9.8 - 13.7 (1.0 - 1.4, 7.2 - 10.1)
14.7 - 20.6 (1.5 - 2.1, 10.8 - 15.2)
M8
 1 (0.039)
8.8 - 11.8 (0.9 - 1.2, 6.5 - 8.7)
24.5 - 32.4 (2.5 - 3.3, 18.1 - 23.9)
35.3 - 48.1 (3.6 - 4.9, 26.0 - 35.4)
M10
 1.25 (0.049)
17.7 - 23.5 (1.8 - 2.4, 13.0 - 17.4)
47.1 - 63.7 (4.8 - 6.5, 34.7 - 47.0)
69.6 - 94.1 (7.1 - 9.6, 51.4 - 69.4)
M12
 1.25 (0.049)
32.4 - 44.1 (3.3 - 4.5, 23.9 - 32.5)
86.3 - 117.7 (8.8 - 12.0, 63.7 - 86.8)
127.5 - 172.6 (13.0 - 17.6, 94.0 - 127.3)
M14
 1.5 (0.059)
51.0 - 69.6 (5.2 - 7.1, 37.6 - 51.4)
136.3 - 185.3 (13.9 - 18.9, 100.5 - 136.7)
201.0 - 271.6 (20.5 - 27.7, 148.3 - 200.4)
M16
 1.5 (0.059)
79.4 - 107.9 (8.1 - 11.0, 58.6 - 79.6)
211.8 - 286.4 (21.6 - 29.2, 156.2 - 211.2)
311.8 - 421.7 (31.8 - 43.0, 230.0 - 311.0)
M20
 1.5 (0.059)
163.8 - 221.6 (16.7 - 22.6, 120.8 - 163.5)
448.2 - 607.0 (45.7 - 61.9, 330.5 - 447.7)
639.4 - 864.9 (65.2 - 88.2, 471.6 - 638.0)
M24
 2 (0.078)
276.5 - 373.6 (28.2 - 38.1, 204.0 - 275.6)
759.0 - 1026.8 (77.4 - 104.7, 559.8 - 757.3)
1080.7 - 1462.2 (110.2 - 149.1, 797.1 - 1078.4)
M30
 2 (0.078)
562.9 - 762.0 (57.4 - 77.7, 415.2 - 562.0)
1553.4 - 2102.5 (158.4 - 214.4, 1145.7 - 1550.8)
2210.4 - 2991.0 (225.4 - 305.0, 1630.3 - 2206.1)

Flange BOLT (Nominal diameter)
Flange NUT (Nominal diameter)

Hyundai Venue. General information

Hyundai Venue. General information

Flange BOLT/NUT Normal screw
Torque Nm (kg.m, Ib-ft)
Nominal diameter.
(mm)
Pitch [ mm (in.) ]
4T
8T
10T

Hyundai Venue. General information

Hyundai Venue. General information

Hyundai Venue. General information

Hyundai Venue. General information
M5
 0.8 (0.031)
2.0 - 2.9 (0.2 - 0.3, 1.4 - 2.2)
5.9 - 7.8 (0.6 - 0.8, 4.3 - 5.8)
8.8 - 11.8 (0.9 - 1.2, 6.5 - 8.7)
M6
 1 (0.039)
3.9 - 4.9 (0.4 - 0.5, 2.9 - 3.6)
9.8 - 13.7 (1.0 - 1.4, 7.2 - 10.1)
14.7 - 19.6 (1.5 - 2.0, 10.8 - 14.5)
M8
 1.25 (0.049)
8.8 - 11.8 (0.9 - 1.2, 6.5 - 8.7)
24.5 - 32.4 (2.5 - 3.3, 18.1 - 23.9)
35.3 - 48.1 (3.6 - 4.9, 26.0 - 35.4)
M10
 1.5 (0.059)
17.7 - 24.5 (1.8 - 2.5, 13.0 - 18.1)
48.1 - 65.7 (4.9 - 6.7, 35.4 - 48.5)
70.6 - 96.1 (7.2 - 9.8, 52.1 - 70.9)
M12
 1.75 (0.068)
31.4 - 43.1 (3.2 - 4.4, 23.1 - 31.8)
84.3 - 113.8 (8.6 - 11.6, 62.2 - 83.9)
123.6 - 167.7 (12.6 - 17.1, 91.1 - 123.7)
M14
 2 (0.078)
51.0 - 68.6 (5.2 - 7.0, 37.6 - 50.6)
135.3 - 182.4 (13.8 - 18.6, 99.8 - 134.5)
198.1 - 268.7 (20.2 - 27.4, 146.1 - 198.2)
M16
 2 (0.078)
79.4 - 107.9 (8.1 - 11.0, 58.6 - 79.6)
212.8 - 288.3 (21.7 - 29.4, 157.0 - 212.7)
311.8 - 421.7 (31.8 - 43.0, 230.0 - 311.0)

Flange BOLT/NUT Thin screw
Torque Nm (kg.m, Ib-ft)

Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

Hyundai Venue. General information

Hyundai Venue. General information

Hyundai Venue. General information

Hyundai Venue. General information
M5
 0.5 (0.019)
2.9 - 2.9 (0.3 - 0.3, 2.2 - 2.2)
6.9 - 8.8 (0.7 - 0.9, 5.1 - 6.5)
9.8 - 13.7 (1.0 - 1.4, 7.2 - 10.1)
M6
 0.75 (0.029)
3.9 - 5.9 (0.4 - 0.6, 2.9 - 4.3)
10.8 - 14.7 (1.1 - 1.5, 8.0 - 10.8)
16.7 - 21.6 (1.7 - 2.2, 12.3 - 15.9)
M8
 1 (0.039)
9.8 - 12.7 (1.0 - 1.3, 7.2 - 9.4)
26.5 - 35.3 (2.7 - 3.6, 19.5 - 26.0)
38.2 - 52.0 (3.9 - 5.3, 28.2 - 38.3)
M10
 1.25 (0.049)
19.6 - 25.5 (2.0 - 2.6, 14.5 - 18.8)
51.0 - 68.6 (5.2 - 7.0, 37.6 - 50.6)
75.5 - 102.0 (7.7 - 10.4, 55.7 - 75.2)
M12
 1.25 (0.049)
35.3 - 48.1 (3.6 - 4.9, 26.0 - 35.4)
94.1 - 126.5 (9.6 - 12.9, 69.4 - 93.3)
138.3 - 186.3 (14.1 - 19.0, 102.0 - 137.4)
M14
 1.5 (0.059)
55.9 - 75.5 (5.7 - 7.7, 41.2 - 55.7)
148.1 - 200.1 (15.1 - 20.4, 109.2 - 147.6)
216.7 - 293.2 (22.1 - 29.9, 159.8 - 216.3)
M16
 1.5 (0.059)
86.3 - 116.7 (8.8 - 11.9, 63.7 - 86.1)
229.5 - 309.9 (23.4 - 31.6, 169.3 - 228.6)
336.4 - 455.0 (34.3 - 46.4, 248.1 - 335.6)

Hyundai Venue. General information   
1)
The torques shown in the table are standard values under the following conditions.
•
Nuts and bolts are made of galvanized steel bar.
•
Galvanized plain steel washers are inserted.
•
All nuts, bolts and plain washers are dry.
2)
The torques shown in the table are not applicable.
•
When spring washers, toothed washers and the like are inserted.
•
If plastic parts are fastened.
•
If self-tapping screws or self-locking nuts are used.
•
If threads and surfaces are coated with oil.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: In-car Sensor. Description and operation

    Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and accord

    Hyundai Venue (QX) (2020-2026) Service Manual: Components and components location

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0193