| Basic Service Symbols |
|
Symbol |
Meaning |
|
|
Do not reuse the part. Replace a new one. |
|
|
Apply engine oil or transmission oil to the part. |
|
|
Apply automatic transmission fluid (ATF) to the part. |
|
|
Apply grease to the part. |
|
|
Apply sealant to the part. |
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater unit assembly. (Refer to Heater - "Heater Unit") 3. Separate the evaporator temperature sensor connector (A), loosen the mounting screws and remove the eva
Removal 1. Remove the bumper cover. (Refer to Body - "Front Bumper Cover") 2. Disconnect the connector (A) from the PDW sensor. [L - Type] Installation 1.