Hyundai Venue (QX): Heater / Heater Core. Repair procedures
| Replacement |
| 1. |
Remove the heater unit assembly.
(Refer to Heater - "Heater Unit")
|
| 2. |
Loosen the mounting screws and remove the heater core cover (A).
|
| 3. |
Loosen the mounting screws and remove the PTC heater (A).
|
| 4. |
Pull out the heater core (A) from the heater unit.
|
| 5. |
To install, reverse the removal procedure.
|
Replacement 1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery / recycling / charging station.
Description The PTC (Positive Temperature Coefficient) heater is installed at the exit or the backside of heater core. The PTC heater is an electric heater using a PTC element as an auxiliary heating device that supplements deficiency of interior heat source in highly effective diesel engine.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Temperature Control Actuator. Components and components location
Hyundai Venue (QX) (2020-2026) Service Manual: Blower Resistor (Manual). Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Remote start
- Repair procedures
- Engine Mechanical System
- New on site
- Most important about car
