Hyundai Venue (QX): Lubrication System / Oil Level Gauge & Pipe. Repair procedures

Hyundai Venue (QX) (2020-2026) Service Manual / Engine Mechanical System / Lubrication System / Oil Level Gauge & Pipe. Repair procedures

Removal and Installation
1.
Remove the oil level gauge & rod (A).
Tightening torque :
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)

Hyundai Venue. Oil Level Gauge & Pipe. Repair procedures
2.
Install in the reverse order of removal.

    Removal 1. Disconnect the battery negative terminal. 2. Remove the engine room under cover.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Heater Core. Repair procedures

    Replacement 1. Remove the heater unit assembly. (Refer to Heater - "Heater Unit") 2. Loosen the mounting screws and remove the heater core cover (A). 3.

    Hyundai Venue (QX) (2020-2026) Service Manual: PTC Heater. Repair procedures

    Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.

    Categories

     
    Copyright В© 2026 www.hvenueqx.com - 0.0202