Hyundai Venue (QX): Lubrication System / Oil Pan. Repair procedures

Hyundai Venue (QX) (2020-2026) Service Manual / Engine Mechanical System / Lubrication System / Oil Pan. Repair procedures

Removal
1.
Disconnect the battery negative terminal.
2.
Remove the engine room under cover.
3.
Drain the engine oil.
(Refer to Lubrication System - "Engine Oil")
4.
Using the SST (09215-3C000) and remove the oil pan (A).

Hyundai Venue. Oil Pan. Repair procedures

Hyundai Venue. Oil Pan. Repair procedures   
•
Insert the SST between the oil pan and the ladder frame by tapping it with a plastic hammer in the direction of â‘  arrow.
•
After tapping the SST with a plastic hammer along the direction of â‘¡ arrow around more than 2/3 edge of the oil pan, remove it from the ladder frame.
Hyundai Venue. Oil Pan. Repair procedures   
•
Do not turn over the SST abruptly without tapping. It be result in damage of the SST.
Installation
1.
Install the oil pan.
(1)
Using a razor blade and gasket scraper, remove all the old packing material from the gasket surfaces.
Hyundai Venue. Oil Pan. Repair procedures   
•
Check that the mating surfaces are clean and dry before applying liquid gasket.
(2)
Apply liquid gasket as an even bead, centered between the edges of the mating surface.
Liquid gasket : TB 1217H or LOCTITE 5900H
Hyundai Venue. Oil Pan. Repair procedures   
•
To prevent leakage of oil, apply liquid gasket to the inner threads of the bolt holes.
•
Do not install the parts if five minutes or more have elapsed since applying the liquid gasket.
Instead, reapply liquid gasket after removing the residue.
•
After assembly, wait at least 30 minutes before filling the engine with oil.
(3)
Install the oil pan (A) with the bolts.
Uniformly tighten the bolts in several passes.
Tightening torque :
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)

Hyundai Venue. Oil Pan. Repair procedures
2.
Refill the engine oil.
Capacity
Total : 3.7 - 4.0L (3.90 - 4.22 US qt, 3.25 - 3.51 lmp qt, 0.97 - 1.05 US gal)
Oil pan : 3.3L (3.48US qt, 2.90lmp qt, 0.87 US gal)
Drain and refill in cluding oil filter :
3.6L (3.80US qt, 3.16lmp qt, 0.95 US gal)
3.
Install in the reverse order of removal.

    Components 1. Gasket 2. Oil screen 3. Oil pan 4. Drain plug gasket 5. Drain plug

    Removal and Installation 1. Remove the oil level gauge & rod (A). Tightening torque : 9.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Repair procedures

    Inspection The following section describes how to diagnose faults using a diagnostic instrument. 1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.

    Hyundai Venue (QX) (2020-2026) Service Manual: Schematic diagrams

    System Block Diagram Component Parts And Function Outline Component part Function Vehicle-speed sensor, ESP/ABS Control Module Converts vehicle speed to pulse. ECM Receives signals from sensor and control switches.

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0132