Hyundai Venue (QX): Front Suspension System / Rear Torsion Beam Axle. Components and components location
| Components Location |
| 1. Torsion beam axle |
Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2.
Removal [Rear drum brake type] 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Ambient Temperature Sensor. Description and operation
Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.
Hyundai Venue (QX) (2020-2026) Service Manual: Warning Indicator. Components and components location
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front door trim") 3. Disconnect the power door mirror connector from the harness 4.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Rear Seats
- Repair procedures
- Tire Pressure Monitoring System (TPMS) (Type A)
- New on site
- Most important about car
