| Removal |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the rear bumper.
(Refer to Body - "Rear Bumper Cover")
|
| 3. |
Remove the rear fog lamp assembly (A) after loosening the mounting screws.
|
| 4. |
Replace the turnsignal lamp bulb after turning the bulb socket counterclockwise.
|
| INSTALLATION |
| 1. |
Install the rear fog lamp.
|
| 2. |
Connect the negative (-) battery terminal.
|
Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Check for continuity between the terminals. 3.
Component Location 1. Heater unit assembly Compoents 1. Mode control actuator 2. Heater core case 3. Center duct seal 4. PTC heater 5. Heater core assembly 6. Heater case [LH] 7.