Resetting the System
System Standby

Driver Attention Warning system enters the ready status and displays the 'Standby' screen in the following situations.
-- The camera does not detect the lanes.
-- Driving speed remains over 112 MPH (180 km/h).
System setting Driver Attention Warning system is set to be on, when your vehicle is first delivered to you from the factory. To turn ON Driver Attention Warning system, turn on the engine, and then select 'User Settings → Driver Assistance → Driver Attention Warning → Inattentive Driving Warning’ on the LCD display.
Check Driver Attention Warning (DAW) system When the warning message appears, the system is not working properly. In this case, have the vehicle inspected by an authorized HYUNDAI dealer.
Inspection The following section describes how to diagnose faults using a diagnostic instrument. 1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.
Self Diagnosis 1. Self-diagnosis process. • When operating the self-diagnostics, the below fault(self-diagnostics code) will blink at 0.