Hyundai Venue (QX): Blower / Blower Resistor (Manual). Repair procedures
| Inspection |
| 1. |
Measure the resistance between the terminals.
|
| 2. |
The measured resistance is not within specification, the blower resistor
must be replaced. (After removing the resistor)
|
| Replacement |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Separate the resistor connector (A), loosen the mounting screws and
remove the blower resistor (B).
|
| 3. |
To install, reverse the removal procedure.
|
Description It is installed to the DATC and adjusts the fan rpm by precisely controlling the voltage applied to the blower motor.
Description The climate control air filter is located in the blower unit. It eliminates foreign materials and odor. The particle filter performs a role as an odor filter as well as a conventional dust filter to ensure comfortable interior environment.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Compressor. Description and operation
Description The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of the engine. The compressor changes low pressure and low temperature refrigerant gas into high pressure and high temperature refrigerant gas.
Hyundai Venue (QX) (2020-2026) Service Manual: Compressor. Repair procedures
Removal Precautions for using the plastic pulley • Be careful not to place the pulley to downwards of the floor or table.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Engine Electrical System
- Tire Pressure Monitoring System (TPMS) (Type A)
- Warning and Indicator Lights
- New on site
- Most important about car
