| Replacement |
| 1. |
Using a flat-tip screwdriver, lift up slightly the socket clips (A)
of both ends on the lifter (B), and then remove the lifter from the
bracket.
|
| 2. |
Push the socket of the lifter into the bracket for installation.
|
Replacement • Put on gloves to prevent hand injuries.
Replacement 1. Remove the tailgate weatherstrip (A). • Do not apply sealant to the body.
Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.
Removal lf replacement of the rear corner radar unit bracket or extension wire is required, replace the defective part only with a new one. 1.