Replacement 1. Remove the front bumper cover. (Refer to Front Bumper - "Front Bumper Cover") 2.
Adjustment 1. Place the car on a flat surface and check whether thebody and trunk lid are well-aligned. 2.
Oil Specification 1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor (PAG) oil varies according to compressor model.
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.