Hyundai Venue: Ignition Lock Switch / Specifications
Hyundai Venue (QX) (2020-2023) Service Manual / Clutch System / Ignition Lock Switch / Specifications
| Specifications |
|
Item |
Specifications |
|
Working voltage |
DC 12.5V ± 0.3V |
|
Operating force |
Initial position : 0.25 ± 0.15N(0.025 ± 0.015kg, 0.056 ± 0.034lb) |
|
Full position : 0.8 ± 0.2 N(0.08 ± 0.02 kgf, 0.180 ± 0.045 lb) |
|
|
Working temperature |
-40°C ~ 80°C (-104°F ~ 176°F) |
Description and operation
Description
–
Ignition lock switch is mounted on the clutch pedal.
–
Ignition lock switch is operated when you press the clutch pedal...
Other information:
Hyundai Venue (QX) (2020-2023) Service Manual: Torque Converter Control Solenoid Valve (T/CON_VFS). Description and operation
Description • Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. • This variable force solenoid valve indirectly controls the hydraulic pressure inside the torque converter...
Hyundai Venue (QX) (2020-2023) Service Manual: Camshaft Position Sensor (CMPS). Repair procedures
Inspection 1. Check signal waveform of CKPS and CMPS using a scan tool. Specification : Refer to "Waveform" Removal • DON’T remove the camshaft position sensor during engine running or right after engine stops, or a scald by the flowed out engine oil may occur...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Remote start
- System Setting and Activation
- Fuel Filler Door
- New on site
- Most important about car
Fuel gauge
This gauge indicates the approximate amount of fuel remaining in the fuel tank.
Information
The fuel tank capacity is given in chapter 2. The fuel gauge is supplemented by a low fuel warning light, which will illuminate when the fuel tank is nearly empty. On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank.
Copyright © 2023 www.hvenueqx.com