Hyundai Venue: Blind-Spot Collision Warning (BCW) / System Description
Blind-Spot Collision Warning
Blind-Spot Collision Warning (BCW) system uses radar sensors in the rear bumper
to monitor and warn the driver of an approaching vehicle in the driver's blind spot
area.
1. Blind-Spot Area

The blind spot detection range varies relative to vehicle speed.
Note that if your vehicle is traveling much faster than the vehicles around you,
the warning will not occur.
2. Closing at high speed

Blind-Spot Collision Warning system will alert you when it detects a vehicle
is approaching in an adjacent lane at a high rate of speed. If the driver activates
the turn signal when the system detects an oncoming vehicle, the system sounds an
audible alert.
WARNING
- Always be aware of road conditions while driving and be alert for unexpected
situations even though Blind-Spot Collision Warning system is operating.
- Blind-Spot Collision Warning system is supplemental systems to assist
you. Do not entirely rely on the systems. Always pay attention, while driving,
for your safety.
- Blind-Spot Collision Warning system is not a substitute for proper and
safe driving. Always drive safely and use caution when changing lanes. Blind-Spot
Collision Warning system may not detect every object alongside the vehicle.
• Setting Blind-Spot Safety function The driver can activate the system by placing
the ignition switch to the ON position and by selecting 'User Settings → Driver
Assistance → Blind- Spot Safety'...
Other information:
..
Description
The ECM (Electro Chromatic inside rear view Mirror) is for dimming the reflecting
light from a vehicle behind at night, Preventing glare from the light. The forward
facing sensor detects brightness of the surroundings, while the rearward looking
sensor detects the strength of the reflecting light and adjusts the reflexibility
of the mirror in the range of 7 - 85%...
Categories

Your HYUNDAI uses a Smart Key, which you can use to lock or unlock the driver
and passenger doors or the rear liftgate.
1. Door Lock
2. Door Unlock
3. Remote start
read more