| Components |

| 1. Crankshaft damper pulley |
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2.
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2.
Component Location [Engine Room] 1. Condenser 2. Discharge hose 3. Suction & Liquid tube assembly 4. Compressor 5. Service port (High pressure) 6. A/C Pressure transducer (APT) 7. Service port (Low pressure) 8.
Removal lf replacement of the rear corner radar unit bracket or extension wire is required, replace the defective part only with a new one. 1.