Hyundai Venue: Seat Belt Pretensioner (BPT) / Description and operation

Hyundai Venue (QX) (2020-2022) Service Manual / Restraint / Seat Belt Pretensioner (BPT) / Description and operation

Description

The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner seat belt helps to reduce the severity of injury to the front seat occupants by retracting the seat belt webbing. This prevents the front occupants from thrusting forward and hitting the steering wheel or the instrument panel when the vehicle crashes.

(Seat belt pretensioner may be activated in side impact collisions if the vehicle has side airbag or crutain airbag.)

•	Never attempt to measure the circuit resistance of the Seat Belt Pretensioner (BPT) even if you are using the specified tester. If the circuit resistance is measured with a tester, the pretensioner will be ignited accidentally. This will result in serious personal injury.

Seat Belt Pretensioner (BPT)

Components and components location

Other information:

Hyundai Venue (QX) (2020-2022) Service Manual: Front Wheel Speed Sensor. Repair procedures

Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque : 107...

Hyundai Venue (QX) (2020-2022) Service Manual: Output Speed Sensor. Description and operation

Description The output speed sensor is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the TCM. The sensor provides critical input data that's used in feedback control, damper clutch control, gear setting control, line pressure control, clutch activation pressure control, and sensor fault analysis...