Hyundai Venue: Interior Trim / Door Scuff Trim. Repair procedures
• |
Put on gloves to prevent hand injuries.
|
• |
When removing with a flat-tip screwdriver or remover, wrap protective
tape around the tools to prevent damage to components.
|
• |
Use a plastic panel removal tool to remove interior trim pieces
without marring the surface.
|
• |
Take care not to bend or scratch the trim and panels.
|
|
1. |
Using a flat-tip screwdriver or remover, remove the front door scuff
trim (A).

|
2. |
To install, reverse removal procedure.
•
|
Replace any damaged clips (or pin-type retainers).
|
|
|
• |
Put on gloves to prevent hand injuries.
|
• |
When removing with a flat-tip screwdriver or remover, wrap protective
tape around the tools to prevent damage to components.
|
• |
Use a plastic panel removal tool to remove interior trim pieces
without marring the surface.
|
• |
Take care not to bend or scratch the trim and panels.
|
|
1. |
Remove the rear seat cushion cover
(Refer to Rear Seat - "Rear Seat Cushion Cover")
|
2. |
Loosen the mounting screws and remove the rear door scuff trim (A).

|
3. |
To install, reverse removal procedure.
•
|
Replace any damaged clips (or pin-type retainers).
|
|
|
Other information:
Temperature control (2)
Turn the knob to the right to increase the temperature. Turn the knob to the
left to decrease temperature.
The temperature will increase or decrease by 1°F/0.5°C for each incremental location.
When set to the lowest temperature setting, the air conditioning will operate continuously...
To increase Cruise Control speed
Push the toggle switch up (RES+) and hold it, while monitoring the SET speed
on the instrument cluster. The set speed will increase by 5 MPH (8 km/h) increments.
Release the toggle switch when the desired speed is shown and the vehicle will
accelerate to that speed...
Categories

Your HYUNDAI uses a remote key, which you can use to lock or unlock the driver
and passenger doors or the rear liftgate.
(1) Door Lock
(2) Door Unlock
(3) Panic
Locking Your Vehicle
To lock your vehicle:
1. Make sure all doors, the engine hood and the liftgate are closed.
read more