Specifications
Items
Specification
Hood
Type
Rear hinged, stay rod type
Front Door
Construction
Front hinged, frame door construction
Regulator system
Wire drum type
Locking system
Pin-fork system
Rear Door
Construction
Front hinged, frame door construction
Regulator system
Wire drum type
Locking system
Pin-fork system
Tail Gate
Type
Front hinged, gas lifter type
Seat Belts
Front
3 point type with Emergency Locking Retractor (E...
Other information:
The instrument panel vent air flow can be directed up/down or left/right using
the vent adjustment lever.
The air flow can also be CLOSED using the vent adjustment lever. The instrument
panel air vents are the “clickto- close” type.
To CLOSE the instrument panel vents perform the following:
-- For the driver side vents, slide the vent adjustment lever to the left until
it clicks...
Hub Nut Tightening Sequence
Tighten the hub nuts as follows.
Tightening torque :
107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)
•
When using an impact gun, final tightening torque should be
checked using a torque wrench...