Hyundai Venue: Timing System / Drive Belt Tensioner. Components and components location

Hyundai Venue (QX) (2020-2023) Service Manual / Engine Mechanical System / Timing System / Drive Belt Tensioner. Components and components location

Components

Hyundai Venue. Drive Belt Tensioner. Components and components location

1. Alternator Bracket (Drive Belt Tensioner)

Idler. Repair procedures

Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2...

Drive Belt Tensioner. Repair procedures

Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2...

Other information:

Hyundai Venue (QX) (2020-2023) Service Manual: Tail Gate Assembly. Repair procedures

Replacement 1. Remove the TailGate trim. (Refer to tailgate - "Tailgate Trim") 2. Using a flat-tip screwdriver, lift up slightly the socketclips (A) of both ends on the lifter (B), and thenremove the lifter from the bracket...

Hyundai Venue (QX) (2020-2023) Service Manual: Camshaft Position Sensor (CMPS). Schematic diagrams

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Do not install bumper guards or replace the bumper with a nongenuine HYUNDAI parts. This may adversely affect the collision and air bag deployment performance. Place the ignition switch in the LOCK/OFF or ACC position when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs conducted by an authorized HYUNDAI dealer.

Hyundai Venue. Air bag collision sensors