Hyundai Venue: Airbag Module / Driver Airbag (DAB) Module and Clock Spring. Description and operation
• |
Driver Air Bag (DAB)
DAB is installed in the steering wheel, and electrically connected to
the SRSCM via clock spring. It is deployed during frontal impact to
protect the driver.
|
• |
Clock Spring
Clock spring delivers actuation signal, generated by the sensors installed
in the front and right/left sides of a vehicle, to the inflator (gas
generator) of the driver air bag module via internal cable.
It also delivers actuation signal of the steering wheel remote control
switch and horn to relevant systems via internal cable.
|
• |
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using the specified tester. If
the circuit resistance is measured with a tester, accidental
airbag deployment will result in serious personal injury.
|
|
Other information:
Description
The ECM (Electro Chromatic inside rear view Mirror) is for dimming the reflecting
light from a vehicle behind at night, Preventing glare from the light. The forward
facing sensor detects brightness of the surroundings, while the rearward looking
sensor detects the strength of the reflecting light and adjusts the reflexibility
of the mirror in the range of 7 - 85%...
INSPECTION
1.
Remove the front left door trim.
(Refer to Body - "Front Door Trim")
2.
Disconnect the mirror connector.
3.
Check for continuity between the terminals in each switch position according
to the table...
Categories

Your HYUNDAI uses a Smart Key, which you can use to lock or unlock the driver
and passenger doors or the rear liftgate.
1. Door Lock
2. Door Unlock
3. Remote start
read more