Hyundai Venue: Front Seat / Front Seat Frame Assembly. Repair procedures

Hyundai Venue (QX) (2020-2023) Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Frame Assembly. Repair procedures

Replacement

•	Put on gloves to prevent hand injuries.

1.	Remove the front seat back cover. (Refer to Front Seat - "Front Seat Back Cover")

2.	Remove the front seat cushion cover. (Refer to Front Seat - "Front Seat Cushion Cover")

3.	Remove the SAB module. (Refer to Restraint - "Side Airbag (SAB) Module")

Loosen the mounting bolts and detach the front seat back frame assembly (A) from the front seat cushion frame assembly (B).

Tightening torque :

44.1 - 53.9 N.m (4.5 - 5.5 kgf.m, 32.5 - 39.8 lb-ft)

Hyundai Venue. Front Seat Frame Assembly. Repair procedures

To install, reverse removal procedure.

•	For the seat equipped with side airbag, remove the side airbag from the seat frame assembly. (Refer to Restraint - "Side Airbag (SAB) Module")

•	Before service, be fully aware of precautions and service procedure relevant to air bag. (Refer to Restraint - "Side Airbag (SAB) Module")

Front Seat Frame Assembly. Components and components location

Rear Seat

Other information:

Hyundai Venue (QX) (2020-2023) Owners Manual: Detecting Sensor

The rear corner radars are located inside the rear bumper for detecting the side and rear areas. Always keep the rear bumper clean for proper operation of the system. NOTICE The system may not work properly when the bumper has been damaged, or if the rear bumper has been replaced or repaired...

Hyundai Venue (QX) (2020-2023) Service Manual: Special service tools

Special Service Tools Tool Name / Number Illustration Description LKA Compensator (09890-3V100) Used for compensating front view camera unit BCW Sensor Correction Tool Set (09958-3T500) Used to correct the blind-spot radar unit...