Hyundai Venue: Front Suspension System / Front Strut Assembly. Components and components location

• |
Tighten with specifed torque at curb position of vehicle
|
• |
Fix the strut rod end and tighten the nut
|
|
1. Lock nut cover
2. Lock nut
3. Insulator dust cap
4. Self lock nut
5. Strut insulator
6. Strut bearing
7. Spring upper seat
|
8. Spring upper pad
9. Coli spring
10. Dust cover
11. Bumper rubber
12. Spring lower pad
13. Front sturt assembly
|
Components
1. Front sub frame
2. Front axle
3. Front stabilizer bar
4. Steering gearbox
5. Front lower arm
6...
Removal
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2...
Other information:
Inspection
1.
Disconnect the negative battery terminal.
2.
Remove the roof trim assembly.
(Refer to Body - "Roof Trim Assembly")
3.
Ground the terminals as below table, and check that the sunroof unit
operates after disconnecting the sunroof motor connector...
High Mounted Stop Lamp Replacement
1. Open the liftgate.
2. Remove the lamp cover from the lamp assembly with a cross-tip screwdriver.
3. Remove the socket from the assembly by turning the socket counterclockwise
until the tabs on the socket align with the slots on the assembly...
Categories

1. Instrument cluster
2. Horn
3. Key ignition switch/ Engine Start/Stop button
4. Infotainment system
5. Hazard warning flasher switch
read more