Hyundai Venue: Air Conditioning System / In-car Sensor. Description and operation
The In-car air temperature sensor is built in the heater & A/C control unit.
The sensor contains a thermistor which measures the temperature of the inside.
The signal decided by the resistance value which changes in accordance with
perceived inside temperature, is delivered to heater control unit and according
to this signal the control unit regulates in-car temperature to intended value.
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector...
Diagnosis With GDS
1.
The heating, ventilation and air conditioning can be quickly diagnosed
failed parts with vehicle diagnostic system (GDS)...
Other information:
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3...
If the tire is worn evenly, a tread wear indicator will appear as a solid band
across the tread. This shows there is less than 2/32 inch (1.6 mm) of tread left
on the tire. Replace the tire when this happens.
Do not wait for the tread surface to become level with the tread wear indicators
before replacing the tire...
Categories
Seat belt warning light (for driver’s seat)
As a reminder to the driver, the seat belt warning light will illuminate for
approximately 6 seconds each time you place the ignition switch to the ON position
regardless of belt fastening. However, if the seat belt is unfasted, a warning chime
will sound for approximately 6 seconds.
read more