Hyundai Venue: Crash Pad / Cowl Cross Bar Assembly. Components and components location

Hyundai Venue (QX) (2020-2025) Service Manual / Body (Interior and Exterior) / Crash Pad / Cowl Cross Bar Assembly. Components and components location

Component Location

Hyundai Venue. Cowl Cross Bar Assembly. Components and components location

1. Cowl cross bar assembly

Main Crash Pad Assembly. Repair procedures

Replacement • Put on gloves to prevent hand injuries...

Cowl Cross Bar Assembly. Repair procedures

eplacement • Put on gloves to prevent hand injuries...

Other information:

Hyundai Venue (QX) (2020-2025) Service Manual: Knock Sensor (KS). Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the knock sensor connector. 3. Measure resistance between the CKPS terminals 1 and 2. 4...

Hyundai Venue (QX) (2020-2025) Service Manual: Repair procedures

Inspection Wave Form 1. Check signal waveform of CKPS and CMPS using a diagnostic tool. Specification : Refer to "DTC Guide" Coil Resistance 1...

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Do not install bumper guards or replace the bumper with a nongenuine HYUNDAI parts. This may adversely affect the collision and air bag deployment performance. Place the ignition switch in the LOCK/OFF or ACC position when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs conducted by an authorized HYUNDAI dealer.

Hyundai Venue. Air bag collision sensors