Hyundai Venue: Parking Distance Warning (PDW) / Parking Distance Warning (PDW) Sensor. Schematic diagrams
System Overview
Parkin Distance Warning (PDW) is an electronic driving aid that warns the driver
to be cautious while parking or driving at low speed...
Removal
1.
Remove the bumper cover.
(Refer to Body - "Front Bumper Cover")
2.
Disconnect the connector (A) from the PDW sensor...
Other information:
Description
The passenger airbag (PAB) is installed inside the crash pad and protects the
front passenger in the event of a frontal crash. The SRSCM determines if and
when to deploy the PAB.
•
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using a specified tester...
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal.
3.
Remove the air duct and air cleaner assembly.
(Refer to Intake and Exhaust Manifold System - "Air Cleaner")
4...
Categories
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious
injury or death:
Do not hit or allow any objects to impact the locations where air bags
or sensors are installed.
Do not perform maintenance on or around the air bag sensors. If the location
or angle of the sensors is altered, the air bags may deploy when they should
not or may not deploy when they should.
Do not install bumper guards or replace the bumper with a nongenuine
HYUNDAI parts. This may adversely affect the collision and air bag deployment
performance.
Place the ignition switch in the LOCK/OFF or ACC position when the vehicle
is being towed to prevent inadvertent air bag deployment.
Have all air bag repairs conducted by an authorized HYUNDAI dealer.
read more