| Removal |
| 1. |
Remove the bumper cover.
(Refer to Body - "Front Bumper Cover")
|
| 2. |
Disconnect the connector (A) from the PDW sensor.
[L - Type]
|
| Installation |
| 1. |
Install the PDW sensor.
|
| 2. |
Install the bumper cover.
|
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.
Description The photo sensor is located at the center of the defrost nozzles. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving portion, generates an electromotive force in proportion to the amount of radiation received which is transferred to th