Hyundai Venue: Power Windows / Power Window Motor. Components and components location
[Front]
[Rear]
Component Location
1. Drive power window main switch
2. Passenger power window main switch
3. Rear window switch
4...
Inspection
Front Power Window Motor
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim...
Other information:
The Vehicle Stability Management (VSM) is a function of the Electronic Stability
Control (ESC) system. It helps ensure the vehicle stays stable when accelerating
or braking suddenly on wet, slippery and rough roads where traction over the four
tires can suddenly become uneven...
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect IATS connector.
3.
Measure resistance between IATS terminals 3 and 4.
4.
Check that the resistance is within the specification...
Categories
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious
injury or death:
Do not hit or allow any objects to impact the locations where air bags
or sensors are installed.
Do not perform maintenance on or around the air bag sensors. If the location
or angle of the sensors is altered, the air bags may deploy when they should
not or may not deploy when they should.
Do not install bumper guards or replace the bumper with a nongenuine
HYUNDAI parts. This may adversely affect the collision and air bag deployment
performance.
Place the ignition switch in the LOCK/OFF or ACC position when the vehicle
is being towed to prevent inadvertent air bag deployment.
Have all air bag repairs conducted by an authorized HYUNDAI dealer.
read more