Operation and Leakage Check Check all of the following items : Component Procedure Brake Booster (A) Check brake operation by applying the brakes during a test drive.
Components 1. Reservoir cap 2. Reservoir 3. Brake booster 4. Master cylinder assembly 5. Clevis
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.
Replacement 1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery / recycling / charging station. 3. When the engine is cool, drain the engine coolant from the radiator.