Removal Brake Hose [Front] 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2.
Specification Fluid Type DOT 4 Reservoir capacity (cc) MAX LEVEL A + B + C + D + E 388 ± 20 ON LEVEL B + C + D 152 ± 20 MIN LEVEL - 136 PART LEVEL C Pri : 30 D Sec : 41 CLUTCH LEVEL E 6
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front door trim") 3. Disconnect the power door mirror connector from the harness 4.