Hyundai Venue (QX): Brake Line / Repair procedures

Hyundai Venue (QX) (2020-2025) Service Manual / Brake System / Brake Line / Repair procedures

Removal
Brake Hose
[Front]
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the brake fluid level sensor connector (A).

Hyundai Venue. Repair procedures
3.
Remove the brake fluid from the master cylinder reservoir with a syringe.
Hyundai Venue. Repair procedures   
•
Do not spill brake fluid on the vehicle, it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
•
Make sure no dirt or other foreign matter is allowed to contaminate the brake fluid.
4.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
5.
Remove the front wheel and tire (A) from front hub.
Tightening torque :
107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)
Hyundai Venue. Repair procedures   
•
Be careful not to damage the hub bolts when removing the front wheel and tire (A).

Hyundai Venue. Repair procedures
6.
Remove the brake hose clip (A).
7.
Remove the tube flare nut (B).
Tightening torque :
12.7 - 16.7 N.m (1.3 - 1.7 kgf.m, 9.4 - 12.3 lb-ft)

Hyundai Venue. Repair procedures
8.
Remove the brake caliper hose bracket bolt (A).
Tightening torque :
12.7 - 16.7 N.m (1.3 - 1.7 kgf.m, 9.4 - 12.3 lb-ft)

Hyundai Venue. Repair procedures
9.
Remove the hose after loosening the brake hose bolt (A) from the caliper.
Tightening torque :
24.5 - 29.4 N.m (2.5 - 3.0 kgf.m, 18.1 - 21.7 lb-ft)

Hyundai Venue. Repair procedures
[Rear Drum Brake Type]
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the brake fluid level sensor connector (A).

Hyundai Venue. Repair procedures
3.
Remove the brake fluid from the master cylinder reservoir with a syringe.
Hyundai Venue. Repair procedures   
•
Do not spill brake fluid on the vehicle, it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
•
Make sure no dirt or other foreign matter is allowed to contaminate the brake fluid.
4.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
5.
Remove the rear wheel and tire (A) from the rear hub.
Tightening torque :
107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)
Hyundai Venue. Repair procedures   
•
Be careful not to damage the hub bolts when removing the rear wheel and tire (A).

Hyundai Venue. Repair procedures
6.
Remove the tube flare nut (A).
7.
Loosen the brake hose bracket bolt (B).
Tightening torque
(A) : 13.7 - 16.7 N.m (1.4 - 1.7 kgf.m, 10.1 - 12.3 lb-ft)
(B) : 7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 7.8 - 11.8 lb-ft)

Hyundai Venue. Repair procedures
8.
Remove the tube flare nut (A).
9.
Remove the hose after loosening the brake hose bolt (B) from the rear drum brake.
Tightening torque
(A) : 13.7 - 16.7 N.m (1.4 - 1.7 kgf.m, 10.1 - 12.3 lb-ft)
(B) : 7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 7.8 - 11.8 lb-ft)

Hyundai Venue. Repair procedures
[Rear Disc Brake Type]
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the brake fluid level sensor connector (A).

Hyundai Venue. Repair procedures
3.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
4.
Remove the rear wheel and tire (A) from the rear hub.
Tightening torque :
107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)
Hyundai Venue. Repair procedures   
•
Be careful not to damage the hub bolts when removing the rear wheel and tire (A).

Hyundai Venue. Repair procedures
5.
Remove the brake hose clip (A).
6.
Remove the tube flare nut (B).
Tightening torque
12.7 - 16.7 N.m (1.3 - 1.7 kgf.m, 9.4 - 12.3 lb-ft)

Hyundai Venue. Repair procedures
7.
Remove the hose after loosening the brake hose bolt (A) from the caliper.
Tightening torque
24.5 - 29.4 N.m (2.5 - 3.0 kgf.m, 18.1 - 21.7 lb-ft)

Hyundai Venue. Repair procedures
Inspection
1.
Check the brake tubes for cracks, crimps and corrosion.
2.
Check the brake tube flare nuts for damage and fluid leakage.
Installation
1.
To install, reverse the removal procedures.
Hyundai Venue. Repair procedures   
•
Use a new washer (A) whenever installing.
[Front]

Hyundai Venue. Repair procedures

[Rear]

Hyundai Venue. Repair procedures
2.
After installation, bleed the brake system.
(Refer to Brake System - "Brake Bleeding Prcoedures")
3.
Check the brake oil leakage and pedal operating condition.

    Components

    Other information:

    Hyundai Venue (QX) (2020-2025) Service Manual: Repair procedures

    Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Check for continuity between the terminals. 3.

    Hyundai Venue (QX) (2020-2025) Service Manual: Compressor. Components and components location

    Components Location 1. Compressor Components 1. Clutch bolt 2. Disc & Hub assembly 3. Clutch hub spacer 4. Snap ring 5. Pulley 6. Clutch magnetic coil 7.

    Categories

     
    Copyright © 2025 www.hvenueqx.com - 0.0129