Hyundai Venue (QX): Smart Key System / Components and components location
| Component Location |
| 1. Interior antenna 1 2. Interior antenna 2 3. Door outside handle antenna |
4. Smart key unit 5. Buzzer |
| 1. Tail gate open switch |
2. Bumper antenna |
Specifications Smart Key Unit (Integrated Body Contorl Unit(IBU)) Items Specification Rated voltage DC 12V Operating voltage DC 9 - 16V Operating temperature -40°F to 185°F (-40°C to 85°C) Load Less than 3.
Description The SMART KEY system is a system that allows the user to access and operate a vehicle in a very convenient way. To access the vehicle, no traditional key or remote control unit is needed.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: In-car Sensor. Description and operation
Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and accord
Hyundai Venue (QX) (2020-2026) Service Manual: Warning Indicator. Components and components location
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front door trim") 3. Disconnect the power door mirror connector from the harness 4.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Engine Coolant
- Operating Door Locks from Outside the Vehicle
- Remote start
- New on site
- Most important about car
