| Components |

| 1. Front pillar trim 2. Front door scuff trim 3. Center pillar upper trim 4. Rear pillar trim |
5. Rear door scuff trim 6. Cowl side trim 7. Center pillar lower trim |
Component Location 1. Front door scuff trim 2. Rear door scuff trim
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater unit assembly. (Refer to Heater - "Heater Unit") 3. Separate the evaporator temperature sensor connector (A), loosen the mounting screws and remove the eva