| Component Location |

| 1. Front door scuff trim |
2. Rear door scuff trim |
Components 1. Front pillar trim 2. Front door scuff trim 3. Center pillar upper trim 4. Rear pillar trim 5.
Replacement [Front] • Put on gloves to prevent hand injuries.
Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed.
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.