Hyundai Venue (QX): Trunk Trim / Components and components location

Hyundai Venue (QX) (2020-2026) Service Manual / Body (Interior and Exterior) / Trunk Trim / Components and components location

Components

Hyundai Venue. Components and components location

1. Luggage side trim [LH]
2. Rear transverse trim
3. Luggage board assembly
 4. Luggage side trim [RH]
5. Covering self trim assembly
6. Luggage floor net assembly

    Replacement    • Put on gloves to prevent hand injuries.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Ambient Temperature Sensor. Description and operation

    Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.

    Hyundai Venue (QX) (2020-2026) Service Manual: Mode Control Actuator. Repair procedures

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0127